Sale Topcon CR-S2 Handheld 3D Scanner with VSLAM NEW
TOPCON
The Topcon CR-S2 combines MLF-SLAM (multiple localization fusion–SLAM), VSLAM (visual SLAM), and RTK-SLAM technologies. This integrated approach delivers stable, centimeter-level accuracy - even in areas where GNSS signals are weak or unavailable - by leveraging LiDAR, visual, IMU, and RTK data. High-fidelity point clouds and real-time colorized imaging ensure actionable results in a single workflow, minimizing return visits and rework. Work faster and smarter with portable, high-performance 3D scanning. One-person operation and reliable data, anywhere you need.
£9,357.69
Sale Topcon CR-S2 Handheld 3D Scanner with VSLAM NEW
The Topcon CR-S2 combines MLF-SLAM (multiple localization fusion–SLAM), VSLAM (visual SLAM), and RTK-SLAM technologies. This integrated approach delivers stable, centimeter-level accuracy - even in areas where GNSS signals are weak or unavailable - by leveraging LiDAR, visual, IMU, and RTK data. High-fidelity point clouds and real-time colorized imaging ensure actionable results in a single workflow, minimizing return visits and rework. Work faster and smarter with portable, high-performance 3D scanning. One-person operation and reliable data, anywhere you need.
Professionals in construction surveying, geospatial, and engineering need reliable spatial data capture in challenging environments, including outdoor, indoor, and GNSS-restricted areas. Applications span site documentation, utility mapping, volume calculations, progress monitoring, and underground data capture, requiring efficiency and accurate data in complex,time-sensitive settings.
The Topcon CR‑S series is designed to address these challenges through advanced multi‑sensor fusion, integrating LiDAR‑based SLAM, visual SLAM, inertial measurements, and GNSS positioning enhanced with RTK corrections. This combined approach delivers stable and repeatable positioning performance, supporting reliable results across outdoor, indoor, and GNSS‑challenged environments, including dense construction sites, tunnels and mining environments.
Specifications :
System Parameters
Absolute Accuracy
<3 cm (1.18 in.) 1
Relative Accuracy
<2 cm (0.79 in.) 2
Repeat Accuracy
<2 cm (0.79 in.) 3
Horizontality/Verticality
<0.025° 4
Power Supply Method
Lithium Battery Powered
Battery Capacity
3450 mAh
Single Battery Life
2 h 5
Weight
1.3 kg (2.87 lbs) (with base, battery, and RTK module)
Dimensions
345×187×120 mm (13.58x7.36x4.72 in.)
Protection Level
IP64
Storage Capacity
512 GB SSD
Port
USB-C
Control Method
APP, Button
Firmware Upgrade Method
OTA, Offline
Operating Temperature
-20°C to 40°C (-4°F to 104°F)
Device Storage Temperature
-40°C to 70°C (-40°F to 158°F)
Battery Storage Temperature
Recommended Storage Temperature: 22°C to 30°C (71.6°F to 86°F) 6
LiDAR Sensor Parameters
Laser
Mid360
Scan Rate
200,000 pts/s
LiDAR Accuracy
2 cm (0.79 in.)
Safety Level
Class 1 (Eye-safe)
Laser Wavelength
905 nm
Detection Range
40 m (131.23 ft) @ 10% reflectivity;
70 m (229.66 ft) @ 80% reflectivity
Field of view
Horizontal 360 ° , Vertical -7° to 52°
Camera Parameters
Number of Cameras
4
Visual SLAM camera
1.3MP×2
Panoramic Camera
12MP ×2
Frame Rate
Adjustable
RTK Parameters
Satellite Systems
BDS B1I, B2I, B3I, B1C, B2b
GPS L1C/A, L2C, L2P(Y), L5 GLONASS G1, G2, Galileo E1, E5a, E5b, E6, QZSS L1C/A, L2C, L5
SBAS L1C/A
Channels
1408
RTK Differential Protocol
NTRIP
RTK Accuracy
Horizontal: 0.8 cm (0.31 in.) + 1 ppm
Vertical:1.5 cm (0.59 in.) + 1 ppm
Differential Data
RTCM V3.X
RTK Data Format
.rtk
IMU Parameters
Output Frequency
200 Hz
Post-Processing Attitude Accuracy
Roll/Pitch: 0.005°, Heading: 0.01°
Post-Processing Position Accuracy
Horizontal: 0.01 m (3.94 in.), Vertical: 0.02 m (7.87 in.)
Mapping Method
Mapping Principles
MLF-SLAM, PPK-SLAM, RTK-SLAM, SLAM
Real-Time Colorization
Supported
Real-Time Processing
Supported
Output Specifications
Colored Point Cloud
LAS
MESH
LOD-OSGB
Panoramic Image
JPG
Telescopic Pole Adapter
Weight
300 g (0.66 lbs)
Supported Telescopic Pole Diameter
25-25.5 mm (0.98-1.00 in.) 7
Frontpack Kit Parameters
Weight
2.1 kg (4.63 lbs)
Outer Packaging Dimensions
560×340×160 mm (22.05x13.39x6.30 in.)
Backpack Kit Parameters
Weight
3.9 kg (8.60 lbs)
Dual battery power display
Supported
Dimensions
580×303×145 mm (22.83x12.99x5.71 in.)
Hot Swap
Supported
INCLUDED :
Magnet Bridge Software
RTK Network License
Backpack & Front-Pack
Rover-Pole Adapter
Vehicle Mount Adapter
Battery
Battery Charger/Adapter
Field Controllers
Also you can check product : Sale Topcon GLS 2200 Multifunctional 3D Laser Scanner NEW
- Availability: 26 In Stock
- Model: CR-S2
- SKU: 7010-2476CR-S2
-
Brand:
