Sale Olympus OmniScan X3 64 Phased Array Flaw Detector NEW

Olympus OmniScan X3 64 Phased Array Flaw Detector NEW

Every flaw detector in the OmniScan X3 series is a complete phased array toolbox. Innovative TFM and advanced PA capabilities help you identify flaws with confidence while powerful software tools and simple workflows improve your productivity.

Power You Can Carry

Housed in the field-proven rugged and portable OmniScan X3 enclosure, the OmniScan X3 64 flaw detector’s powerful focusing capabilities supported by its larger element-aperture capacity enable you to fully exploit 64-element phased array probes and 128-element aperture TFM. Utilize its enhanced performance to meet the inspection challenges of thick and attenuative materials and expand your potential to develop new procedures for a wider range of applications.

OmniScan X3 Phased Array Flaw Detector with Innovative TFM

Confidence You Can See
The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, including total focusing method (TFM) imaging and advanced visualization capabilities, backed by its high image quality enable you to complete your inspection with greater confidence.

Confirm Your TFM Beam Coverage in Advance

The Acoustic Influence Map (AIM) tool provides you with an instant visual model of the sensitivity based on your TFM mode, probe, settings, and simulated reflector.

The AIM tool takes the guesswork out of creating your scan plan—visualize the effect of a wave set (TFM mode), see where sensitivity stops, and adjust your scan plan accordingly.

See What You’ve Been Missing with PCI

Our innovative amplitude-free live phase coherence imaging (PCI) improves small-defect sensitivity and penetration in noisy materials, all while easing your setup and simplifying sizing. Available on the OmniScan X3 64 flaw detector as of MXU 5.10.

Benefit from 64-Pulser Phased Array

Exploit the full potential of 64-element phased array probes using the OmniScan X3 64 flaw detector to achieve improved resolution at the focal point.

Right-hand image: Acquired using a 32-channel OmniScan X3 unit with a 64-element probe (5L64-A32 model), this S-scan is a high-quality image but the resolution reflects the fact that only the middle 32 elements could be used for the focal law.

Left-hand image: Using a full 64-element aperture (5L64-A32 probe), the OmniScan X3 64 flaw detector provides better PA resolution at the focal point, enabling you to more easily distinguish indications that are close together or in a cluster.

Access Full 128-Element Aperture TFM

Made possible by new generation electronics, TFM imaging offers better focusing capabilities for smaller indications and an improved signal-to-noise ratio (SNR). With its 128-element aperture capacity, the OmniScan X3 64 model provides enhanced image clarity.

Right-hand image: This TFM image was acquired with 64 elements of a 128-element probe (3.5L128-I4 model) using an OmniScan X3 32-channel model.

Left-hand image: Here, the OmniScan X3 64 flaw detector enabled us to use the full 128-element aperture of our 3.5 MHz, 128-element I4 probe. Note the improved resolution and reduced background noise.

Acquire up to 4X Faster TFM
Achieve total focusing method (TFM) acquisition speeds of up to 4 times faster when using a 64-element probe. Compared to models with 32 pulsers, the OmniScan X3 64 flaw detector offers a significant improvement in efficiency owing to its larger aperture capability.

Improved Phased Array
Up to 3x as fast as the OmniScan MX2 flaw detector (max pulse repetition frequency)
Single TOFD menu for an accelerated calibration workflow
800% high amplitude range reduces the need to rescan
Onboard Dual Linear Array and Dual Matrix Array probe support accelerates setup creation.

Ease Corrosion Monitoring Using Phased Array
Using phased array to inspect corrosion offers many benefits, including excellent coverage and resolution. However, becoming proficient in phased array techniques can be challenging. The OmniScan X3 flaw detector combines advanced functions such as gate synchronization with thoughtfully designed software and simplified menus, so you can obtain accurate data more easily. Configure your setup quickly thanks to its A-scan synchronization processing and manual time-corrected gain (TCG).

Specifications :

Type
Multigroup, multimode ultrasonic flaw detector

Size (W × H × D)
335 mm x 221 mm x 151 mm (13.2 in. x 8.7 in. x 5.9 in.)

Weight
5.7 kg (12.6 lb) (with 1 battery)

Hard Drive Capacity
OmniScan X3 : Internal 64 GB SSD
OmniScan X3 64 : Internal 1TB SSD
extendable using an external USB drive

Storage Devices
SDHC and SDXC cards or most standard USB storage devices
Compatible only with NTFS and FAT32 formats.

Max Onboard File Size
25 GB

GPS
Yes (unless specified otherwise for some regions)

Alarms
3

Wireless Connection
Yes – wireless LAN dongle included in the package (model varies according to region)

PA Connectors
1 connector

UT Connectors
4 (2 channels P/R)

Certifications
ISO 18563-1:2015
ISO-22232-1:2020

Display

Type
TFT LCD with resistive touch screen

Size
269 mm (10.6 in.)

Resolution
1280 × 768 pixels

Number of Colors
16 million

Viewing Angles
Horizontal: −85° to 85°
Vertical: −85° to 85°

I/O Ports

USB 2.0
2 ports (one hidden behind the battery)

USB 3.0
1 port

Video Output
Video out (HDMI)

Memory Card
SDHC port

Communication
Ethernet

I/O Lines

Encoder
2-axis encoder line (quadrature quadrature direction)

Digital Input
6 digital inputs, TTL

Digital Output
5 digital outputs, TTL

Acquisition On/Off Switch
Through the configuration of a digital input

Power Output Line
5 V nominal, 1 A (short-circuit protected), and 12 V output at 1 A

External DC Supply

DC-IN Voltage
15 VDC to 18 VDC (min. 50 W)

Connector
Circular, 2.5 mm pin diameter, center-positive

Battery

Type
Lithium-ion battery

Capacity
87 Wh

Number of Batteries
2

Life
5 hours using 2 batteries (hot-swap capable)

PA/UT Configuration

Bit Depth
16 bits

Maximum PRF
20 kHz

Frequency

Effective Digitizing Frequency
Up to 100 MHz

Display

Refresh Rate
A-scan: 60 Hz; S-scan: 20 Hz to 30 Hz

Envelope (echo-dynamic mode)
Yes: Volume-corrected S-scan (30 Hz)

A-Scan Height
Up to 800%

Synchronization

On Internal Clock
1 Hz to 10 kHz

External Pace
Yes

On Encoder
On 2 axes: from 1 to 65,536 steps

Processing

Maximum Number of A-Scan Data Points
Up to 16,384

Real-Time Averaging
PA: 2, 4, 8, 16
UT: 2, 4, 8, 16, 32, 64

Rectification
RF, full wave, half wave+, half wave-

Filtering
PA channel (OmniScan X3): 8 low-pass, 6 band-pass, and 4 high-pass filters
PA channel (OmniScan X3 64): 9 band-pass and 7 high-pass filters
UT channel: 8 low-pass, 6 band-pass, and 4 high- pass filters (3 additional filters when configured in TOFD)

Video Filtering
Smoothing (adjusted to the probe frequency range)

Programmable TCG

Number of Points
32: One TCG (time-corrected gain) curve per focal law
Range    PA (standard): 40 dB per step of 0.1 dB
UT: 100 dB per step of 0.1 dB

Maximum Slope
PA (standard): 40 dB/10 ns
UT: 40 dB/10 ns

INCLUDED :

OmniScan MXU software
Standard Phased Array Probe, 10 MHz Linear Array, 16 Elements
Standard removable IHC option for SA10 wedges
Standard wedge for angle beam phased-array probe A10
Custom Wedge for Angle Beam Phased-Array Probe A10
Standard Phased Array Probe, 5.0 MHz Linear Array, 32 Elements
Standard Wedge for Angle Beam Phased-Array Probe Type A31
Mini encoder, 5 m cable, waterproof with Lemo connector
Portable manual couplant feed unit
NAVSHIPS Block. 1018 Steel
93 Wh lithium-ion battery
Spare screen protector
DC charger with power cord
USB key with MXU Software and User’s Manuals
Empty USB key for file transfer purposes
Complimentary OmniPC analysis software
Calibration certificate
Transport case

Also you can check product : Sale Olympus OmniScan SX Phased Array Ultrasonic Flaw Detector NEW

• Availability: 37 In Stock
• Model: OmniScan X3
• Brand: