Sale Olympus OmniScan SX Phased Array Ultrasonic Flaw Detector NEW

Olympus OmniScan SX Phased Array Ultrasonic Flaw Detector NEW

Evident is proud to introduce the OmniScan® SX, a flaw detector that benefits from more than 20 years of phased array experience and shares the OmniScan DNA. For improved ease of use, the OmniScan SX features a new streamlined software interface displayed on an 8.4 in. (21.3 cm) touch screen. A single-group and non-modular instrument, the OmniScan SX is easy to operate and cost-effective for less demanding applications.

The OmniScan SX flaw detector benefits from more than 20 years of phased array technological development and shares the OmniScan DNA. For improved ease of use, the OmniScan SX software features a streamlined and user-friendly interface displayed on an 8.4 in. (21.3 cm) touch screen. A single-group and non-modular instrument, the OmniScan SX flaw detector is easy to operate and cost-effective for less demanding applications.

SX PA and SX UT

OmniScan SX flaw detectors come in two models: the SX PA and SX UT. The SX PA is a 16:64PR phased array unit, which, like the UT-only SX UT, is equipped with a conventional UT channel for pulse-echo, pitch-catch or TOFD inspection. Compared to the OmniScan X4, the SX is 33% lighter and 50% smaller, offering an unprecedented level of portability for an OmniScan unit.

Touchscreen Interface and Advanced Inspection Features

The OmniScan SX touch screen offers a full-screen mode option that maximizes visibility, converting many menu functions into easy touch-screen operations. The intuitive interface provides smooth menu selection, zooming, gate adjustments, cursor movements, and text and value input. These, along with other premium integrated features, including easy-to-follow setup and calibration wizards, a rapid refresh rate for both the S-scan and A-scan displays, and a fast pulse repetition frequency (PRF), make the OmniScan SX flaw detector a highly efficient inspection tool.

OmniScan SX flaw detectors are fully compatible with our extensive portfolio of scanners, probes and accessories, as well as with its dedicated software companions, NDT SetupBuilder software and OmniPC analysis software. Combined, the complete family of software and hardware contributes to an efficient inspection workflow, from design and setup to acquisition and analysis.

Software Features

For greater functionality in weld and corrosion applications, the OmniScan SX software interface was simplified and the response time optimized to provide the best experience possible for customers.

Onboard software features include:

Export C-Scan
End-View with group merge
Interleave
Analysis attenuation gain
Scrolling layouts for easy interpretation
Improved accessibility with more interactive menus
Optimized main menus and wizards
Onboard compound scan
Curved geometry ray-tracing for longitudinal welds

For applications requiring a multiprobe configuration, the multigroup layouts were improved so that the scanner configuration is reflected in the software interface. The position of the different scans is determined by their distance to the center of the weld, providing an easy-to-understand and appealing layout.

Setup with OmniScan SX Flaw Detector

The most efficient way to create a setup is to perform the simulation in NDT SetupBuilder, and import it directly via SD card or USB key, to the OmniScan SX unit. Then, only a few basic operations are required in the flaw detector, such as setting the gate and range, before acquisition can begin. You can also easily create a setup right in the OmniScan unit, thanks to the following features:

Automatic probe recognition.
Intuitive wizards to guide the user through every step of the setup creation using the interactive help menu.
Weld Overlay and RayTracing simulation.
Group copy option for fast multiple-group configuration.

Acquisition with OmniScan SX Flaw Detector
Thanks to NDT SetupBuilder and OmniPC companion software, the OmniScan SX flaw detector can be dedicated exclusively to calibration and acquisition tasks or, if preferred, you can perform all the steps of an inspection, using its large, user-friendly touch screen.

Calibration for Code-Compliant Inspection
To achieve a code-compliant inspection, the Calibration Wizard enables you to ensure that every focal law in every group is the direct equivalent of a single-channel conventional flaw detector.

Follow its step-by-step guidance through the required calibrations including: Velocity, Wedge Delay, Sensitivity, TCG, DAC, AWS, and encoder calibrations. TOFD PCS calibration and lateral wave straightening can be performed automatically.

Acquisition
The OmniScan SX flaw detector enables easy configuration of inspection parameters for either manual, one-line, or raster encoded scans. The acquisition is displayed in real time through different views and offers the ability to store data on a hot-swappable SD card or USB 2.0 device.

Intelligent layouts for configuring up to 8 groups.
Full-screen mode for better visualization of defects.
Synchronization and measurements can be processed using different gate combinations.

Flexible Data Analysis with OmniPC Software

OmniPC software benefits from the same user interface and analysis and reporting features as the OmniScan onboard software, but with the added flexibility that comes from operating it on a PC.

By using OmniPC software for your analysis, the OmniScan unit can be dedicated to scanning, greatly increasing your workflow efficiency. This software can also be used in conjunction with extra large screens for increased visibility, and with keyboard shortcuts for faster operations.

Data Analysis with OmniScan SX Flaw Detector

Data, reference, and measurement cursors for defect sizing.
Extensive readings database and predefined lists for trigonometry, flaw statistics on axes, volumetric position information, code-based acceptance criteria, corrosion mapping statistics, etc.
Views are linked for interactive analysis and are automatically updated when performing off-line gate repositioning.
Optimized preconfigured layouts for quick and simple length, depth, and height sizing of flaws.

Reporting

The OmniScan SX flaw detector and OmniPC software can both be used to generate reports with an indication table listing up to eight readings, such as amplitude, position, and size of the defects. The report can also be customized with additional readings and comments specific to each indication, and can be saved as an HTML document.

RayTracing tools allow indication positions to be represented on the weld profile.
High-resolution images can be inserted along with all relevant inspection parameters.

Specifications :

Housing

Overall dimensions (W x H x D)
267 mm × 208 mm × 94 mm (10.5 in. × 8.2 in. × 3.7 in.)

Weight
3.4 kg (7.5 lb) with battery

Data Storage

Storage devices

SDHC card* or most standard USB storage devices.
*Lexar® brand memory cards are recommended for optimized results.

Data file size
300 MB

I/O Ports

USB ports
2 USB ports, compliant with USB 2.0 specifications

Audio alarm
Yes

Video output
Video out (SVGA)

I/O Lines

Encoder
2-axis encoder line (quadrature, up, down, or clock/direction)

Digital input
4 digital TTL inputs, 5 V

Digital output
3 digital outputs TTL, 5 V, 15 mA maximum per output

Acquisition on/off switch
Yes, through configuration of a digital input

Power output line
5 V, 500 mA power output line (short-circuit protected)

Pace input
5 V TTL pace input

Display

Display size
21.3 cm (8.4 in.) (diagonal)

Resolution
800 pixels x 600 pixels

Brightness
600 cd/m2

Viewing angles
Horizontal: –80° to 80° Vertical: –60° to 80°

Number of colors
16 million

Type
TFT LCD

Power Supply

Battery type
Smart Li-ion battery

Number of batteries
1

Battery life
Minimum 6 hours under normal operating conditions

Environmental Specifications

Operating temperature range
-10 °C to 45 °C
(14 ºF to 113 ºF)

Storage temperature range

–20 °C to 60 °C (–4 ºF to 140 ºF) with battery
–20 °C to 70 °C (–4 ºF to 158 ºF) without battery

Relative humidity
Max. 70% RH at 45°C noncondensing

Ingress protection rating
Designed to meet requirements of IP66

Shockproof rating
Drop-tested according to MIL-STD-810G 516.6

Ultrasound Specifications (applies to OMNISX-1664PR)

Connectors
1 Phased Array connector: PA connector
2 UT connectors: LEMO 00

Number of focal laws
256

Probe recognition
Automatic probe recognition

INCLUDED :

Olympus OmniScan SX 16:64 PA Flaw Detector (BC# -L/T*)
Battery Pack
AC Adapter/Charger
Power Cord
User Manual On Cd-ROM
Carrying Case (G)

Also you can check product : Sale Olympus OmniScan SX Phased Array Ultrasonic Flaw Detector USED

• Availability: 52 In Stock
• Model: OmniScan SX
• Brand: